未分类

How to deal with PVC rain boots bottom residue

The method of treating the bottom residue of PVC rain boots can be divided into the following steps:

1. Preliminary cleaning:

– First, turn the wellies upside down and gently pat or shake them to remove loose dirt, sand and other residue at the bottom.

– Use a soft brush or toothbrush to gently brush away stubborn dirt and stains attached to the sole of the shoe.

2. Wash with water:

– Rinse the bottom of your rain boots under running water, or use a hose to rinse the soles to remove most of the residue.

– Be careful not to overheat the water temperature to prevent accelerating the aging of PVC materials.

Step 3 Use cleaner:

– For oil or other stains that are difficult to remove, a mild cleaner or detergent can be used.

– Apply the cleaner to the stain, wait a few moments, gently scrub with a brush, and then rinse off with water.

4. Dry and air dry:

– Dry the soles with a clean cloth or paper towel to ensure that no moisture remains to prevent slipping or accelerate the aging of the material.

– Dry wellies in a cool, ventilated place, away from direct sunlight and high temperatures.

5. Treatment of stubborn residues:

– If you encounter particularly stubborn residues, such as gum, paint, etc., you can gently scrape them off with a plastic scraper and then clean them with detergent.

– For certain chemical residues, such as oil, you can use a specific cleaning agent, such as gasoline or alcohol, but make sure to rinse thoroughly after use and away from the source of fire.

6. Regular inspection and maintenance:

– After each use, the bottom of the rain boots should be checked for wear and residue, and cleaned in time.

– If the sole is found to be worn or damaged, it should be replaced in time to prevent further damage or affect the safety of use.

Please note that when dealing with the bottom residue of PVC rain boots, you should avoid using too sharp tools or strong chemical cleaners to prevent damage to the rain boot material. Gentle cleaning methods and regular maintenance are the key to maintaining the performance of rain boots and extending their service life.

Welcome to Dexinyuan Technology Co., Ltd. We have our own affiliated factory.Official website Address:https://www.getwishchina.com/

Our factory was established in 2003 and we specialize in personal protective equipment, including PVC rain boots, rubber rain boots, EVA rain boots, safety shoes, helmets and other P P E products.

Related Articles

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注

Check Also
Close
Back to top button